Field-proven power conversion modules, rugged UPS units, and industrial backup systems qualified against stringent defense (MIL-STD) and transportation (EN 50155) standards for immediate deployment in Romania.
High-reliability online double-conversion industrial UPS integrated with Lithium Iron Phosphate (LiFePO4) storage for continuous power backup in sub-zero and high-heat environments.
Hermetically sealed tactical outdoor power system built for Black Sea maritime radar posts and harsh border security installations requiring salt-fog and corrosion resistance.
Engineered to absorb severe structural shock and continuous vibrational loads inside tracked and wheeled armored vehicles operating on rough terrain.
Standard EN 50155 compliant uninterruptible power supply for rolling stock electronics, trackside signaling nodes, and railway telemetry networks.
Compact 2U rackmount power supply optimized for naval vessel bridge systems, sonar suites, and airborne mission electronics requiring unity power factor.
High-capacity three-phase online double-conversion system delivering clean, isolated power to mission-critical command centers and industrial computing infrastructure.
Rugged pole-mounted or ground-deployed power station featuring integrated surge arrestors and internal thermal insulation for remote wireless relays.
Specialized power conditioning unit with wide input frequency range engineered to stabilize erratic voltages in renewable microgrids and isolated power substations.
As a pivotal NATO Eastern Flank ally, Romania is rapidly upgrading its national military infrastructure, naval fleet, and transport networks, creating strict demand for military-off-the-shelf (Mil-COTS) power solutions.
The Romanian Ministry of National Defence (MApN) has committed over 2.5% of annual GDP toward defense modernization. With major procurement programs spanning land platforms (such as Piranha V 8x8 armored vehicles), missile defense systems (HIMARS, Patriot), and aircraft transitions (F-16 to F-35), prime defense contractors in Romania require MIL-STD-1275 certified DC-DC converters and transient filters capable of mitigating extreme heavy-vehicle electrical spikes.
Operated by the Romanian Naval Forces from key hubs like Constanța and Mangalia, surface vessels and coastal defense radar stations require power systems qualified to withstand severe maritime environmental factors. Salt fog, high humidity, continuous pitch-and-roll vibrations, and unconditioned shipboard AC lines demand power converters compliant with MIL-STD-1399 (Section 300B) and IP68 outdoor enclosures.
Beyond military applications, Romania’s modernization under the EU Recovery and Resilience Facility (PNRR) involves extensive rail infrastructure overhauls across the Căile Ferate Române (CFR) network. Modern train signaling, passenger Wi-Fi hubs, and trackside telemetry units mandate DC-DC power supplies compliant with EN 50155 standards, guaranteeing operation across wide DC inputs (24V, 48V, 110V) under Class S2 hold-up requirements.
A technical whitepaper overview of power density, thermal dissipation management, and line filtering in high-reliability military and industrial systems.
Traditional power modules rely on Schottky diodes, incurring fixed forward-voltage drops ($V_f \approx 0.5\text{V} - 0.7\text{V}$) that turn into massive heat dissipation at 50A+ currents. By integrating actively controlled, ultra-low $R_{DS(on)}$ MOSFETs in place of diodes, conduction losses drop by up to 70%, boosting converter efficiency to **96%**.
To eliminate high line-voltage ripple and achieve fast transient responses during severe load steps, our two-stage architecture separates voltage regulation from galvanic isolation. This prevents power stage saturation during input spikes ($250\text{V} / 100\text{ms}$ transients) common in military vehicle starting circuits.
Most military system integration failures occur because external EMI filters interact unpredictably with input filter stages of DC-DC converters. Our Mil-COTS modules are pre-characterized alongside half-brick transient filters, guaranteeing turnkey compliance with MIL-STD-461 (CE102, CS101, RE102).
| Standard / Specification | Target Sector in Romania | Key Electrical & Environmental Requirement | Mil-COTS Solution Capability |
|---|---|---|---|
| MIL-STD-704 (A-F) | Avionics & Air Defense | Aircraft electric power characteristics (115V AC 400Hz, 28V DC bus transients) | AeroQor® & MilQor® active PFC & wide-input DC-DC converters |
| MIL-STD-1275 (D/E) | Armored Vehicles (Land) | 28V DC electrical system inputs, 100V / 50ms surges, 250V voltage spikes | MCOTS Transient Suppressor Filters with zero output drop-out |
| MIL-STD-461 (C-F) | Tactical C4ISR & Radar | Conducted and Radiated Electromagnetic Interference immunity and limits | Matched half-brick & full-brick differential/common-mode EMI filters |
| MIL-STD-1399-300B | Naval Ships (Constanța) | Interface requirements for AC electric power equipment on surface ships | Low-harmonic 3-Phase PFC AC-DC units with low line distortion (<3%) |
| EN 50155 / EN 50121 | Railway (CFR Modernization) | Rolling stock electronic equipment, vibration, shock, input fluctuations | RailQor® series with 66V, 72V, 110V continuous nominal input ranges |
| RTCA / DO-160G | Commercial & Defense Aviation | Airborne environmental conditions and test procedures for power equipment | Conduction-cooled isolated power modules operating up to +100°C baseplate |
From defense technology research parks around Bucharest to naval shipyard operations in Constanța, our Mil-COTS power modules empower mission-critical infrastructure.
In mobile tactical command vehicles, clean DC power is essential for sensitive software-defined radios (SDR), satellite communications, and target tracking computers. Engine alternator noise and winch load dumps create high voltage spikes. Integrating our MCOTS-F-28 transient filter alongside isolated DC-DC bus modules ensures zero signal dropouts during engine restarts.
Stationed along the Dobrogea coastline, military radar installations and automatic identification systems (AIS) face constant exposure to conductive salt spray and power outages caused by severe storms. Utilizing our IP68-rated Rugged Outdoor UPS units provides 8000Wh+ capacity backup, lightning surge arrestments, and sealed thermal dissipation without internal fans that corrode.
Critical energy infrastructure operated by Transelectrica and the Cernavodă Nuclear Power Station requires uninterruptible power systems for emergency SCADA control loops and switchgear trip controls. Our Industrial 10kVA Online Double-Conversion UPS guarantees zero-transfer-time AC power backup with strict galvanic isolation against high-voltage substation grid transients.
Combining USA-based precision manufacturing with multi-decade product lifecycle protection for long-term programs in Eastern Europe.
Every converter module and complete UPS assembly is manufactured at our state-of-the-art facility in Salem, New Hampshire, USA. Complete supply-chain traceability, certified component derating, and rigorous HALT/HASS screening guarantee full compliance with defense prime contractor audits.
Military, naval, and railway programs stay deployed for 20 to 30 years. Unlike commercial semiconductor vendors who phase out components every few years, we guarantee long-life production availability alongside Form-Fit-Function (FFF) replacement pathways to eliminate costly PCB redesigns.
Work directly with seasoned power system application engineers. We assist Romanian OEMs with thermal simulation modeling, board layout optimizations, custom output voltage trimming, and derating analysis prior to final physical prototype builds.
Addressing common technical, regulatory, and logistics queries for defense and industrial buyers in Romania.
Our Mil-COTS power systems pair high-efficiency isolated DC-DC converters (such as the MCOTS series) with dedicated active transient suppression filters. These filters clamp 100V / 50ms transients and suppress high-energy 250V spikes down to a safe continuous operating level for the converter downstream, ensuring seamless operation without shutting down system electronics.
Passive diode rectification converts significant current into wasted heat via diode forward voltage drops. Synchronous rectification replaces diodes with actively switched MOSFETs, reducing conduction losses by up to 70%. In sealed military enclosures (IP67/IP68) where external airflow is unavailable, lower heat dissipation allows system operation at baseplate temperatures up to +100°C without thermal derating failures.
Yes. Our RailQor® line of DC-DC converters is specifically built for rolling stock and trackside electronics deployed on European rail networks. They cover nominal DC inputs from 24V to 110V with continuous wide-range operation, feature 2000Vrms isolation, and meet EN 50155 vibration, shock, and EMC standards (EN 50121-3-2).
All products are manufactured under strict AS9100 / ISO-9001 guidelines at our Salem, NH, facility and shipped directly to defense integrators and industrial customers in Bucharest, Cluj-Napoca, Timișoara, Constanța, and other regional manufacturing centers. Complete export compliance support (ITAR / EAR documentation) and direct engineering support are provided.
Yes. In addition to our broad standard product lines of quarter-brick, half-brick, and full-brick modules, we offer wide-range output voltage trimming and custom rack-mounted system assemblies tailored to unique physical space envelopes and connector specifications required by defense OEMs.
Contact our application engineering team today to request complete product datasheets, CAD models, thermal analysis tools, or a formal technical quotation tailored to your program specifications.
Send an Inquiry